Drum And Barrel Tilters by Standard Duty Below Hook Drum Lifter Cum Tilter

Standard Duty Below Hook Drum Lifter Cum Tilter

In stock

Description

IMPORTANT: Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

Rated load markings and unit identification

Minimum design safety factor of 3, based on yield strength, for load bearing structural components

Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test

All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

These drum dispensers allow you to tilt drum 360 in either direction. Lift and invert drum with drum faucet in place.

Drum carrier manual tilt control options

Kontrol-Karriers have pull chain and chain wheel drum tilt control (shown above left)

Drum Karriers require manually turning drum by hand

Available with optional hand crank drum tilt control

Also available with 16" (41 cm) hand wheel drum tilt control

Below the hook drum carriers to tilt and pour drum with your hoist or crane - Drum Tilters - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... ...drum carriers for controlled Drum Dispensing.