Drum And Barrel Racker by Manual Drum Racker

Manual Drum Racker

In stock

Description

Morse Omni-Lift Drum Rackers lift, move, and place a drum horizontally in a rack

Morse Omni-Lift Karriers (Patented)

Key features

Rack a drum up to 72“ (183 cm) high

Rack a RIMMED 55-gallon (210 liter) drum

Lift a drum from either horizontal or vertical position on the floor

Models with Battery, AIR or Electric Power Drum Lift and Tilt Control

Manual Lift and Tilt Models

Manual and air powered models with spark resistant parts also available

Handle drum with up to a 10” (25.4 cm) long drum faucet in place

Capacity:

800 Lb. (363 kg) full drum

500 Lb. (227 kg) half-full unbalanced, bottom-heavy drum

Omni-LiftTM Drum Rackers enable racking a drum up to 72“ (183 cm) high. They are easily handled by one person. Lift a drum from either horizontal or vertical position on the floor. The Omni-Lift Drum Racker will accommodate a drum faucet that extends up to 10” from the drum.

Models with ergonomic battery, air or plug-in electric Power Drum Lift and Tilt Control. Fully manual lift and tilt models also available. Manual and air powered models available with spark resistant parts.

Steps to Rack a Drum

Secure upright drum in holder with web strap and ratchet

Lift drum

Tilt drum to horizontal

Release web strap

Transport drum to rack, then raise drum

Rack drum in horizontal position

Handle a 55-gallon (210 liter) drum with a drum faucet in place, allowing your drum rack to serve as a dispensing station.

Rack a RIMMED 55-gallon (210 liter) steel drum in horizontal position.

To Rack a RIMMED 55-Gallon (210 liter) PLASTIC Drum install Drum Pad Kit # 3313-P. This kit provides pads to support the flexible sidewalls of a plastic drum. The drum must have suitable top rim for chine catches to engage. NOTE: Models with spark resistant parts already include spark resistant Poly Drum Pad Kit.

Clearance for 8" front wheels is required under the lowest shelf. Drum cradles on rack must be no wider than 16” (40.6 cm) for steel drum, or no wider than 11” (28 cm) for a plastic drum.

You can also place a horizontal 55-gallon (210 liter) steel drum onto the open end of a Morse Stationary Drum Roller, or onto a Portable Drum Roller (except when equipped with accessory # 3313-P).

NOTE: Morse does NOT make or sell drum racks. We manufacture the Drum Racker.

Additional Information:

Delivery Time: 8 to 10 Weeks

Packaging Details: crate