Below Hook Heavy Duty Drum Lifter Chain
Description
Morse 42 Series
Heavy-Duty Drum Lifters
Lift a Drum with Your Crane or Hoist
Two Lifting Modes
Lift upright or horizontal drum
Set drum down upright or on its side
Capacity: 2,000 Lb. (907 kg)
Model 42 Drum Lift is a heavy duty drum lifter for use on your hoist hook or fork mounted hook. Forged hooks are shaped to engage the rims at opposite ends of drum. Alloy chain, links and lifting rings are combined with heavy duty steel rod and welded eyes to provide a heavy duty assembly.
Model 42 Drum Lift has a pair of alloy steel lifting rings for two modes of lifting, as shown at left.
Drum Lifts are Made to Handle
Open top or tight head 55-gallon (210 liter) steel drum, 34“ to 36” (86.4 to 91.4 cm) tall
85-Gallon (322 liter) steel drum, 40“ (101.6 cm) tall
Capacity: 2,000 Lb. (907 kg)
Domestic ship weight: 9 Lb. (4 kg)
Domestic ship dimensions: L31” W5“ H4” (79 x 13 x 10 cm)
Drum Lift allows two lifting modes
1. Horizontal Mode
Use lifting ring connected to rod and chain at middle of assembly
Lift horizontal drum without changing its horizontal orientation
2. Off-Vertical Mode enables upending and downending drum
Use lifting ring on outer end of alloy chain
Lift horizontal drum and have it hang off-vertical
Lift vertical drum by placing rod end hook under bottom rim of drum.
As upright drum leaves floor it tilts to off-vertical position.
Lower drum until its bottom corner meets floor, then guide drum to settle upright or allow it to tilt down to horizontal
Drum Lifts / 55-Gallon Drum Hoists
Model 42 alloy chain, links and lifting rings; steel rod; welded eyes
Model 42-G is the same style drum lifter with hot dip galvanized finish
Each Model 42 and Model 42-G Drum Lift is load tested at the factory at 200% of rated capacity as per American National Standard ASME B30.9 and a load test certificate is enclosed with each unit
Additional Information:
Delivery Time: 2 to 3 Weeks




